An experimental or production, check whether the tank reaches the desired mark, and then start checking the various components are working properly, column (frame plate) is lubricated.
2, pay attention to preheat hot plate temperature, such as below standard, must be experienced chef or corporate procedures under the guidance of adjustment, tamper strictly prohibited without permission.
3, the mold should be placed between the hot plate prevents burns or crushing accidents, do not rise when placed on the hot plate mold.
4, after filling in the mold should be set flat middle man to stand in the center console. Spotting after reaching the required pressure, turn off the motor, any questions please notify equipment maintenance personnel, can not be privately tamper
5, take the mold to use hooks to prevent bruised hands. In case of products sticky mold mold mold tool Beware knock knock hand, prevent mold landing or injured foot.
6, the machine is faulty and must immediately cut off the power, and the first time to notify maintenance personnel in equipment malfunction hang card, remove the parts without permission is strictly prohibited. Crushed mold, is strictly prohibited without permission process.
7, experiments or cut off the power after the end of production, cleaning, filling equipment records.
[china rubber vulcanizing machine manufacturers]