[Rubber injection molding machine] in the energy-saving drive from the viewpoint of molded rubber products, nearly 30% of the energy supply is in the drive. Although compared with the cost of the entire product completion only occupy a small percentage of the cost of energy, especially the part of the drive, but through the application of the intelligent system will can be possible.
[rubber injection molding machine] in the energy-saving drive from the viewpoint of molded rubber products, nearly 30% of the energy supply is in the drive. Although compared with the cost of the entire product completion only occupy a small percentage of the cost of energy, especially the part of the drive, but through the application of the intelligent system will can be possible.
Fast running full automatic rubber injection molding machine running time can be up to 6000 hours a year, making the production cycle of about 100000. A complete cycle time between 30 seconds to a few minutes. This mainly lies in the machining process, when a driver idling in rubber machine, has the certain machine time to rest.
At present, the mainstream of the drive motor to connect the electric/hydraulic regulating pump, its energy consumption is mainly in the form of heat. And idle running and cleaning activities to reduce the efficiency of the drive system, but also greatly influence the machine working time.
Drive pressure, need the energy of the corresponding idle running. Compared with the electric drive concept, in the electric power through direct translational motion of the machine parts occurred transformation, to achieve higher efficiency and processing speed. In the field of natural rubber processing, craft requirements such as the transfer process, and a variety of energy intensive operation, it limits the pure technical efficiency of the power system.
Marplan cold drive technology of hydraulic drive system driven by benefit and energy efficiency of electric drive together. Modern technology and the variable speed motor driven system pump connection, the main area of this motor pump makes on the drive power consumption is reduced, reduce the rate of about 70%. In addition, the use of cold drive technology enables significantly lower cost, the cost reduction is mainly through the discharge of oil cooling and reduce the idle connection of the power supply. Another advantage is the noise in the system can be significantly reduced by 50%.
In the machine cycle, a new design of software and hardware flow control unit took control of the hydraulic system. Energy distribution done through hydraulic components. If the machine does not exist in the movement, the driver will automatically stop motion, at the same time also will not exist in the system energy needs.
Due to hydraulic power distribution, the processing technology and hydraulic drive additional movement will no longer be limited. In this way, you can understand, for example, in the usual way to achieve low-cost hydraulic ejection device.
[ rubber injection molding machine] knowing the typical applications in the drive system makes the positive gravity as many as 3 million Newton. Compared with the current use of hydraulic drive, cold drive system design makes the speed of a single machine has quickened significantly. And shorten the cycle also brought the extra income.