How to maintain the[ horizontal injection molding machine], horizontal injection molding machine tools as a conveyor belt joint, in use process and after the use, also be the same as other tools, maintenance and maintenance, to prolong service life. Now my company produces horizontal injection molding machine, as long as you use proper maintenance, its service life is 8 years.
When horizontal injection molding machine maintenance, should pay attention to the following questions:
1, [horizontal injection molding machine] to deposit environment should be kept dry, well ventilated, avoid electrical lines caused by damp and wet;
2, do not use outdoors in rainy day vulcanizing machine, prevent electric cabinet and the heating plate into the water;
3, if the working environment moisture, water more, when removing handling vulcanization machine, should be made in the ground mat is high, don't let the vulcanizing machine direct contact with water;
4, if in use process, the heating plate water caused by improper operation, should first contact the manufacturer for repair. If the need for emergency repair, the heating plate can be on open cover, water poured out first, and then will be set to manual, electric heated to 100 ℃, keep constant temperature for half an hour, the line to dry, the belt cementing in manual mode. At the same time should promptly contact the manufacturer to carry out the line of the whole change.
5, horizontal injection molding machine for a long time do not need to use, should be every half a month to heat the heating plate (temperature set at 100 ℃), keep the temperature for half an hour or so.
6, after each use, should put clean the water of the water in the pressure plate, especially in winter, if the water will not put clean, often lead to water pressure plate rubber premature aging, the service life of the water pressure plate;
The water right way is, at the end of the vulcanized insulation, [vulcanizing machin]e before disassembly. If after the machine remove water, may lead to incomplete discharge of the water in the water pressure plate.