Attention to aging of rubber vulcanizing machine motor and sulfide pump: work on vulcanized rubber vulcanization machine to normal, intact is to guarantee the normal work of every parts and components in the basic conditions, as long as there is a spare parts damage, then problems will cause the whole machine. Don't know our rubber vulcanizing machine user in the process of using the machine, at the time of routine check and maintenance ever notice the motors and curing aging problem pump, component aging is not damaged, but if no heed, continue to use for a long time, it is not far from damage.
How to determine the [rubber vulcanizing machine] motor and sulfide pump ageing, the simplest is to hear the abnormal noise, especially when their aging serious, sobering noise from the will. If vulcanization pump precision does not accord with a standard, can cause stress and flow fluctuation is big, can't eliminate the phenomenon of trapped oil, to produce noise. In addition, if the part wear clearance is too large, also can cause the oil flow rate, pressure fluctuation from the machine caused by abnormal. For these reasons, the best way is to choose good quality vulcanizing machine parts and components, and usually also must strengthen the maintenance, timely correction of the wear of gear components such as maintenance, and ensure accuracy and gaps in the permitted range.